Expert Heating Solutions (EHS) is a Gas Safe registered boiler installer based in Sevenoaks, Kent (Gas Safe 565074). We supply and fit new combi, system and regular gas boilers for homes and landlords across Kent and South East London. Most like-for-like replacements are completed in one day, with a fixed quote after a free home survey.

At a glance
| Installer | Expert Heating Solutions, Sevenoaks, Kent (TN14 7HW) |
| Registration | Gas Safe 565074 · also MCS APH47620 for heat pumps |
| Boilers we fit | Combi, system and regular (heat-only) gas boilers |
| Time to install | Usually 1 day for a straight swap; 2–3 days for a conversion or move |
| Areas covered | Sevenoaks, Tonbridge, Tunbridge Wells, Maidstone, Dartford, Bromley, Orpington and SE London |
Why choose EHS for your new boiler
Local Gas Safe engineers
Your survey, installation and future servicing are done by the same Sevenoaks-based team, not a subcontractor you have never met.
A survey before the price
We visit, check your gas supply, flue, pipework and hot water use, then give you a fixed quote with no hidden extras.
The right boiler, not the biggest
We size the boiler to your home and hot water demand, which keeps bills down and the boiler running longer.
Fully compliant
Every installation meets Building Regulations, including the Boiler Plus rules for England, and is registered with Gas Safe. You receive a Building Regulations Compliance Certificate.
Heat pump option
As MCS-certified installers, we can also tell you honestly whether a heat pump with the £7,500 grant would suit your home better.
How much does a new boiler cost in Kent?
A like-for-like combi boiler replacement with EHS includes the boiler, fitting, controls and system clean. Converting to a different type of boiler or moving it to a new position costs more because of extra pipework and flue work.
| Type of job | Typical time |
|---|---|
| Combi replaced in the same place | 1 day |
| System or regular boiler replaced like for like | 1–2 days |
| Regular or system boiler converted to a combi | 2–3 days |
| Boiler moved to a new location | 2–3 days |
| Back boiler replaced with a modern boiler | 3+ days |
What’s included in every EHS boiler quote
- New A-rated boiler and standard flue
- Removal and recycling of your old boiler
- Chemical system flush and inhibitor
- Magnetic system filter
- Programmable thermostat and the Boiler Plus energy-saving control required for combi boilers
- Testing, commissioning and Gas Safe registration
- Manufacturer warranty registration and Building Regulations certificate

Which boiler is right for my home?
| Boiler type | Best for | Hot water |
|---|---|---|
| Combi | Flats and homes with 1 bathroom | Heated on demand from the mains, no cylinder or tanks |
| System | Homes with 2+ bathrooms | Stored in a hot water cylinder, no loft tanks |
| Regular (heat-only) | Larger or older homes, low mains pressure | Cylinder plus cold water tank in the loft |
Not sure? We recommend the type and size during your free survey.
Our boiler installation process
- Free survey. An engineer checks your current system, gas supply, flue route and hot water needs.
- Fixed quote. You receive a written quote with the boiler model, warranty and everything included.
- Installation day. We drain the system, remove the old boiler, fit the new boiler, flue, filter and controls, and flush the system.
- Testing and commissioning. We carry out gas tightness and flue gas tests and set the boiler up for efficient running.
- Handover. We show you how to use the controls, register the warranty and notify Gas Safe; your Building Regulations certificate follows by post or email.
- Aftercare. Book an annual boiler service with us to keep your warranty valid.

New boiler or heat pump?
Gas boilers can still be installed in existing homes. A new A-rated boiler is usually the lower upfront cost. An air source heat pump costs more to install, but the £7,500 Boiler Upgrade Scheme grant often closes most of the gap, and it removes your home from gas. We install both, so we can compare them for your property. Read more about air source heat pump installation.
Landlords
We install and service boilers in rented properties across Kent and SE London and issue Gas Safety (Landlord) Certificates, so you can handle installation and annual compliance with one company.
Areas we cover
We install new boilers across West Kent and South East London, including Sevenoaks, Otford, Knockholt, Swanley, Dartford, Tonbridge, Tunbridge Wells, Paddock Wood, Maidstone, Biggin Hill, Orpington, Petts Wood, Chislehurst and Bromley. Call 07446 163248 or email info@eheatingsolutions.co.uk.
Frequently asked questions
How much does a new boiler cost in Kent?
A like-for-like combi boiler replacement with EHS includes the boiler, fitting, controls and system clean. Converting to a combi, moving the boiler or replacing a back boiler costs more. We give a fixed price after a free home survey.
How long does it take to install a new boiler?
A straight swap of a combi boiler in the same position usually takes one day. Converting from a regular or system boiler to a combi, or moving the boiler, usually takes 2–3 days.
Will I be without heating and hot water?
Only while the old boiler is removed and the new one fitted and tested. For a like-for-like replacement, that is normally a single working day.
Should I choose a combi, system or regular boiler?
A combi suits most flats and homes with one bathroom. A system boiler with a cylinder suits homes with two or more bathrooms. A regular boiler suits larger or older homes with low mains water pressure. We confirm the right type during the survey.
Does my installer need to be Gas Safe registered?
Yes. By law, anyone installing a gas boiler in the UK must be on the Gas Safe Register. EHS is registered under number 565074, and you can check this on the Gas Safe Register website.
Do I get a certificate after the installation?
Yes. We register the installation with Gas Safe, and you receive a Building Regulations Compliance Certificate, plus the manufacturer’s warranty registration.
Can I still install a gas boiler, or should I get a heat pump?
You can still install a new gas boiler in an existing home. A heat pump costs more upfront, but the £7,500 Boiler Upgrade Scheme grant often closes most of the gap. As MCS-certified installers, we can compare both options for your home.
Do you install boilers for landlords?
Yes. We install and service boilers in rented homes across Kent and South East London and issue Gas Safety (Landlord) Certificates.
Need a new boiler?
Book a free survey with our Sevenoaks Gas Safe team and get a fixed, no-obligation quote.













